Encoding and decoding 1 tick hex across 1 wire

[Apocryphan]

I didn't speed up the gif, it just ended up looking like that because of the drop in fps. Here is the gfycat vid: https://gfycat.com/ShockedBeautifulDanishswedishfarmdog

You can find a few versions on my plot. /warp apocryphan to get there.

[Chibill]

nice!

[minestyler007]

wow I just made something similar yesterday it looks quite different but I'll check out yours too didn't have a look at it yet because I had no internet the last few days. I'll share my pictures with you later

[minestyler007]

This device takes 1 tick hex across 1 wire and outputs 2 tick hex over 2 wires. This is quite useful as there are possibilities to make a 2 tick hex to bin decoder but not 1 tick. I'm currently working on a version 2 of this because I think I can reduce the time it takes (approx 30 ticks right now) to about 8 or 9 ticks and make it about half the size. Also I'm having some ideas on making huge datastorages with 1 tick hex (inspired by koala_steamed who seamingly didn't manage to decode 1 tick hex but now we have two solutions so I think that's no problem anymore). 

I'll build onw of these on my plot too when I come back from holidays
here are some pictures:

this is the input 1, 3, 5, 7, 9, 11, 13, 15
and this is the output, the first 4 signals are outputted on the bottom the next 4 on the top.
so on the bottom wire 1, 3, 5, 7 and the top wire 9, 11, 13, 15

[Apocryphan]

the trick is to also be able to reverse the signal without the higher SS overtaking the smaller, your only testing it from low to high.



https://gfycat.com/ElementaryQuestionableBeetle

edit: i meant from high to low.

[minestyler007]

it also works from low to high. the same problem also arrises when going from 15 SS to 1 SS in the previous test.


and the outputs: 

[LambdaPI]

What is this sorcery

[Empirer_BAD]

Apo, can you help me understand what's wrong with my multiplexer+b2a? The binary sting (pixels of a character from ROM) sent is perfect, but it isn't displayed properly on the repeater display.

Did finish the ROM. 
World download: https://www.dropbox.com/s/m6w75xt7jps40g...d.zip?dl=0



Recommend the resoucepack "Redstone Dust Power Level 3D" when working with ss.