Un-pythonic program for the Beaglebone Black

[Malcolmforde]

Would this work with the raspberry pi considering that the beaglebone is a Raspberry pi with a second CPU and the GPIO pins in the adunios configeration.

It should, but you would need to swap out the GPIO libraries, and change some code to use the raspis config (I doubt it has P8 and P9 rails, etc).

---

I just remembered that I have an image on my clipboard of it in action *adds*

---

Also, the Beaglebone Black is NOT a raspi (its not even made by the Raspi devs) and the pins are not in the Arduinos configuration. I have no idea where you got this information.