07-15-2013, 11:09 PM
Making a 1 wide adder atm but I kinda failed D: it doesn't have a carry in but does have carry out and its 2 wide because of 1 block :/ need to improve
07-15-2013, 11:09 PM
Making a 1 wide adder atm but I kinda failed D: it doesn't have a carry in but does have carry out and its 2 wide because of 1 block :/ need to improve
07-16-2013, 12:32 AM
1wide O-o it would have to be a 45 degree stack or a 1 up 1 down stagger to work efficiently.
07-16-2013, 01:42 AM
One wide adders and other circuits are usually very slow.
07-16-2013, 01:45 AM
(This post was last modified: 07-16-2013, 01:45 AM by newomaster.)
07-16-2013, 02:59 AM
(07-16-2013, 01:45 AM)newomaster Wrote: So, it's not like we are going to use them in a cpu or anything... lol. It's just because we can. Haha, true. Although, they also tend to get pretty big, I'd be very surprised if you made one smaller than 90 blocks per bit. Good challenge right there.
07-16-2013, 03:49 PM
Currently my adder can calculate 01 and 10
07-16-2013, 06:36 PM
One wide tileable half adder, nice
07-16-2013, 09:14 PM
nono not half, its a full adder but not tileable :p
07-16-2013, 11:21 PM
An adder that can only calculate either the sum or the carry but not both at the same time is by definition a half adder.
|
|