07-17-2013, 07:14 AM
Oh lol... I'm bad at rs ):
07-17-2013, 07:14 AM
Oh lol... I'm bad at rs ):
07-17-2013, 07:50 AM
Hey, no problem! Making your own one wide half or full adder certainly isn't bad at redstone! Keep working on it, excited to see what you come up with
07-18-2013, 12:26 AM
Gave up on it, shouldn't start with a 1 wide before I finished a normal adder :p
07-18-2013, 12:37 AM
Haha, makes sense. Two wide adders are a lot easier to work with, I think they're a lot of fun.
07-23-2013, 08:25 AM
Dcrntricts 2 wide adder can be modified to 1 wide with only 1 added
Torch delay. I reccomend starting with 4 wide adders and then going Over to 2 and 1 wide design.
07-24-2013, 07:44 PM
(This post was last modified: 07-24-2013, 07:44 PM by redstonewarrior.)
Tomys/Icks/I built a 1 wide (45 degree slant, LSB low end) instant carry adder. We used glowstone, which helped with offset/ensuring no backflow. Hmmm.
* redstonewarrior considers finding that, and tomys' refined second version
07-25-2013, 04:27 AM
(This post was last modified: 07-25-2013, 04:28 AM by CMOSprinkles.)
If it's less than 6 ticks to output sum or carry, then that might actually be useful as a super compact adder (even if it's ripple carry)
07-25-2013, 11:42 PM
Imma changing my Adder to 1-2 wide design 4 ticks sum and 2 tick
Carry in 1 bit and instant till 9 bits.(Instant 9)
07-26-2013, 07:59 AM
So, redstonewarrior, any news on that 1 wide adder? That actually sounds pretty exciting if it really is instant-carry.
07-26-2013, 06:15 PM
Oh, yes. We didn't actually use glowstone in V1, and I don't have V2 around (that I know of.) It's somewhere at /pwarp redstonewarrior 4. ({1,2} == main plots, {3} == special project, {4} == nastalgia plot)
|
|