Compact T-Flip-Flop

[Jamel]

This is one of the smallest T-Flip-Flops I've ever seen, this is my design.
-
It's 1 wide, and 4 long.
-
Put any item in the hopper. (I chose a bed)

[EDevil]

Pretty impressive! And its noise-less as well! Gj!

[David]

Über-simple redstone, über compact, über noiseless. Couldn't be better.

[Jamel]

Thanks for the feedback

[tokumei]

Nice, except it depends on the pulse from the button in order to work properly. Having an 8-tick pulse generator for other applications would make it larger. Otherwise, pretty cool!

[youtakun]

Look, mine is even smaller: 1x2x3 long .

Seriously though, what you made isn't a T-FF, it's a T latch, otherwise known as a ticker with hold input. You still need an edge detector to drive it with any signal that isn't already a pulse. A suitable edge detector is also at least 1x2x4.

It's nice to have a short 1-wide silent T-latch though, there are none on the wiki. The only small 1-wide T-FF there is 8 long and uses 2 pistons (and the 0.5tick glitch). The smallest silent 1-wide there is humongous by current standards (T FlipFlop D).

---

Fixed it with a falling-edge-detector, so you can easily stack them to make a binary ripple counter. Incidentally, it also uses two hoppers.

[redstonewarrior]

...there are none on the wiki....

Welcome to ORE! The wiki is now irrelevant.

[Frontrider]

Look, mine is even smaller: 1x2x3 long .

Seriously though, what you made isn't a T-FF, it's a T latch, otherwise known as a ticker with hold input. You still need an edge detector to drive it with any signal that isn't already a pulse. A suitable edge detector is also at least 1x2x4.

It's nice to have a short 1-wide silent T-latch though, there are none on the wiki. The only small 1-wide T-FF there is 8 long and uses 2 pistons (and the 0.5tick glitch). The smallest silent 1-wide there is humongous by current standards (T FlipFlop D).

---

Fixed it with a falling-edge-detector, so you can easily stack them to make a binary ripple counter. Incidentally, it also uses two hoppers.

You mean the one made from 3 droppers (theres something made from 2, but thats unstable) 1 hopper? I seen that in many places.You were the first to invent it?I have machines showed up on youtube 1 or 2 months after i build it.

[EDevil]

Doesn't matter if he's the first one or not. What important is, is that he thought about the functionality and the design.

[Frontrider]

Doesn't matter if he's the first one or not. What important is, is that he thought about the functionality and the design.

Okey, then i said nothing abaut it. But that flip flop is a really good design, we not using any other thing because it's mutch easier to control.